sherwin psm 5 – sherwin psm 5 tam panel
Sherwin’s tam panel PSM-5 is used to check system and process performance with liquid penetrant inspection, One half of the plate is stainless-steel with five starburst indications all varying in size, The different sizes help check penetrants of various sensitivities, The panel has a chrome plated strip approximately 1,75 inches wide by approximately 0,003 inches thick which covers the
PSM-5TM PANEL USAGE AND MAINTENANCE
· Fichier PDF
· Under the trade names of Dubl-Chek and Aqua-Chek, Sherwin Incorporated manufactures fluorescent penetrant and visible dye penetrant and related products used in the non-destructive testing of critical components in the aerospace and welding industries, Contact: Sherwin Inc,, 5530 Borwick Ave,, So, Gate, CA 90280, USA 562-831-6324; fax, 562-923-8370
Date added : 04/05/2010
Sherwin PSM-5 Penetrant System Monitoring Panel – Splitter
PSM-5 PHOTO AND SIZING
sherwin psm 5
Sherwin PSM-5 Penetrant System Monitor Panel A stainless steel panel 0090″ thick and measuring 4 x 6 inches A chrome plated strip runs the length of one side of the panel Five crack centers are evenly spaced in the chrome plating in order of magnitude; the largest is readily visible with low sensitivity penetrants while the smallest is difficult to observe even with high sensitivity
Sherwin Incorporated manufactures each PSM-5 panel to P&W specifications from stainless steel, The panels are ,090 inches thick and measure 4×6 inches, A chrome plated strip runs the length of one side of the panel, Five crack centers are evenly spaced in the chrome strip, The crack centers are raised circular patterns forming a star, or starburst, The smallest crack may appear as a single or
Sherwin Tam Panel PSM 5 Penetrant Inspection
PSM-5 TEST PANEL TAM PANEL Sherwin Incorporated are one of two Pratt and Whitney approved manufacturers of the “Penetrant System Monitoring Panel” which provides a quick means of determining the continued serviceability of liquid penetrant inspection systems: fluorescent or visible; water-washable; post-emulsifiable, or pre-wash, Sherwin Incorporated manufactures each PSM-5 panel to P&WA
PSM-5 TEST PANEL TAM PANEL
Tam Panel Sherwin, Inc,
Sherwin PSM-5 TAM Panel 5 Star Panel, System Performance Check, Penetrant test panels based on the Pratt & Whitney TAM drawing 146040 are one of the most popular industry approved methods of performing system performance checks on DPI systems, Pratt & Whitney Approved 146040 Sherwin are a long standing Pratt & Whitney approved manufacturer of TAM panels with Sherwin generally been seen as
SHERWIN PSM-5 TAM PANEL5 STAR PANELSystem Performance CheckPenetrant test panels based on the Pratt & Whitney TAM drawing 146040 are one of the most popular industry approved methods of performing system performance checks on DPI systems,Pratt & Whitney Approved 146040Sherwin are a long standing Pratt & Whitney approved manufacturer of TAM panels with Sherwin generally been seen a
Sherwin Incorporated manufactures each PSM-5 panel to P&WA specifications, A stainless steel panel, 0,090″ thick and measuring 4 x 6 inches, A chrome or grit plated strip runs the length of one side of the panel, Five cracked starbursts are evenly spaced in the chrome or grit plating in order of magnitude; the largest is readily visible with low sensitivity penetrants, while the smallest is
Sherwin Incorporated manufactures each PSM-5 panel to P&W specifications from stainless steel, The panels are ,090 inches thick and measure 4×6 inches, A chrome plated strip runs the length of one side of the panel, Five crack centers are evenly spaced in the chrome strip, The …
Sherwin PSM-5 Test Panel TAM Panel
PSM-5,System Monitoring
· Under the trade names of Dubl-Chek and Aqua-Chek, Sherwin Incorporated manufactures fluorescent penetrant and visible dye penetrant and related products used in the non-destructive testing of critical components in the aerospace and welding industries, Contact: Sherwin Inc,, 5530 Borwick Ave,, So, Gate, CA 90280, USA 562-831-6324; fax, 562-923-8370
Date added : 04/05/2010
Sherwin PSM-5 Penetrant System Monitor Panel
PSM-5 TAM panel Sherwin
PSM-5TM PANEL USAGE AND MAINTENANCE Pratt & Whitney Tam 146040 USAGE GENERAL PROCEDURES Use the Sherwin Incorporated PSM-5™ Panel “G” or “P” models at the beginning of each work shift to monitor apenetrant system for any sudden changes in materials or hardware performance Conduct the “system test” prior to accepting production parts,and record the processing variables in a …
Tam panel, Mdl: PSM-5, Sherwin
Sherwin PSM-5 TAM Panel
SHERWIN PSM-5 TAM PANEL
Sherwin PSM-5 Penetrant System Monitor Panel: Grit or Polished A chrome plated strip approximately 44,5 mm wide x 0,076 mm thick 1,75 x 0,003 in, covers the length of the panel and the remaining area is a grit blasted surface of medium roughness used for determining penetrant material’s washability, The chrome plated strip contains five cracked centres evenly spaced at 25 mm 1 in
Sherwin Inc manufacturers industry leading liquid penetrant system monitoring products and the PSM-5 is one of the most popular items The PSM-5 test panel is stainless steel 0,090″ thick and measuring 4 x 6 inches A chrome plated strip runs the length of one side of the panel Five crack centers are evenly spaced